Hifi Headphone standalone setup

Discussion in 'Ask The Experts' started by Wadkc, Dec 22, 2014.

  1. Wadkc

    Wadkc New Member

    Joined:
    Dec 22, 2014
    Messages:
    1
    Hi,

    I have an Aragon 4004 amp, a Rotel RC-1070 pre-amp, B&O Beogram 1700 vinyl platter and the Audeze LCD-3 Headphones.

    I haven't connected these together for this stand alone purpose but was curious if this is a good setup or am I missing something?

    I value your opinion. Thanks, Jeff from the US.
     
  2. dalethorn

    dalethorn Active Member

    Joined:
    Jul 3, 2011
    Messages:
    1,611
    Location:
    Charleston South Carolina
    I assume the preamp doesn't have enough power to drive the planar LCD3. Without researching the amp, hopefully you can set the gain (if not already set) so that the headphone can play at customary volume levels when the volume control is between perhaps 30 to 80 percent. Record players can be dangerous if the amp has many times the power of a headphone amp that's typically recommended for the LCD3.
     
Loading...

Share This Page