solder tab came off driver HELP!

Discussion in 'Ask The Experts' started by peculiarism, Jul 31, 2010.

  1. peculiarism

    peculiarism New Member

    Jul 31, 2010
    was trying to re-wire the left driver of my ad700's, when the actual tiny copper solder tab lifted off the base of the driver...

    I still have it, but how the hell do i put it back???

    It is the bottom left solder tab on the left driver (ground).

    Have i completely screwed my cans or is it fixable.

    Any advice greatly appreciated!
  2. RobinHiFi

    RobinHiFi Super Moderator

    Apr 28, 2010
    Hi peculiarism,

    Oh dear! : ( This is not what you want to happen - Luckily most headphone manufacturers are lovely reasonable people with proper service departments which can solve problems like this.

    I think it is probably best to get these booked in and let a technician have a look. I would never discourage anyone from investigating the insides or modifying equipment but if it does go wrong or you cannot find a reason for a fault yourself most Audio Manufacturers are there to help.

    Contact the Audio Technica Service Centre in the UK who will issue you with a Returns Authorisation (RA) number

    For customers based in the UK:
    Tel: 0113 277 1441 (option 4) 9.00am to 5.00pm Mon - Fri

Share This Page