Graham Slee Voyager Portable Headphone Amplifier [HH00133]

Graham Slee Voyager Description

Graham Slee Voyager portable headphone amplifier. High quality headphone amp for driving dynamic headphones, ideal for iPod and MP3 portable audio listening.

Give your iPod a serious sound quality upgrade with the Graham Slee Voyager portable headphone amplifier. The Voyager is a truly portable headphone amplifier and is small enough to fit a shirt pocket! It has a similar "footprint" to the iPod Classic MP3 player, which can be strapped onto the Voyager for ultimate convenience. The Voyager amp connects using a standard 3.5mm jack-lead and connected via the iPod's headphone out sounds remarkably good.

The powerful sound from the Voyager portable headphone amplifier gives an average (noticeable) 10dB boost in sound pressure level above that of most portable players. The Voyager portable headphone amplifier's fast wideband circuit assures all the sound quality of the source is delivered to the headphones, even when used with high performance sources up to studio standards.

Graham Slee Voyager Amp with iPod Classic

It is fully portable, powered by its own replaceable standard issue 9 volt (MN1604; 6LR61) battery (supplied installed), by a USB connection or alternatively by the supplied AC adapter. If left playing into headphones from a continuously looping music source, the battery can last 50 hours or longer. Usually however, battery life will last a number of weeks if the power switch is set to its other positions when not in use, or when being powered by USB connection or by its AC adapter. It does not recharge the battery - a rechargeable 9 volt battery does not have the capacity of a disposable 9 volt battery.

Graham Slee Voyager Features

• Fully portable headphone amplifier with a long battery life (upto 50 hours)
• Powerful and clear sound
• Size matched to the iPod Classic
• Lightweight design - just 180 grams (6.5 ounces)
• Street earphone contour-boost switch
• Battery, USB or AC adapter powered
• AC adapter included for home amp use
• Able to drive high impedance Hi-Fi and Studio headphones

Graham Slee Voyager Reviews

TrustedReviews.com Evaluates Graham Slee Voyager - Phenomenal

"It's simply breathtaking how it transforms the sound, adding warmth, sparkle and a sense of three-dimensionality that wouldn't be out of place in a separates system many, many times its value."

What HiFi? Assesses Graham Slee Voyager -

"You get a full-bodied, solid sound that's well balanced and packed with detail. The tone contour switch adds brashness to the top-end when on 'contour' and makes for a wearing listen."

Hi-Fi World, April 2008 - Review by David Price

"It's notable for two things; its eerie smoothness across the midband and strong but supple bass."

Graham Slee Voyager Specification

• Battery Life: 50hrs Continuous Play, 2-3 Weeks Average Usage
• Distortion: Distortion (THD+Noise): at 80Hz: 0.03%, at 1kHz: 0.03%, at 5.6kHz: 0.05%, at 16kHz: 0.13%
• Frequency Response: Flat: 5Hz to 70kHz (-3dB), Contour: +10dB at 45Hz and 20kHz
• Case Material: ABS and Polyester
• Channel Balance: 0.5dB
• Hum & Noise: -94dB CCIR Q-pk 20Hz-20kHz, <-100dB "A" Curve Weighted
• Stereo Crosstalk: -52dB
• Power sources: Battery, 9V (MN1604; 6LR61), USB 5V via "mini-B" (internal analogue voltage conversion to 9VDC), AC/DC mains adapter 12-24V DC, (polarity protection on each)
• Sound Output power: 12mW rms into 32 Ohms, 10mW rms into 600 Ohms
• Weight: 180g approx. (700g with plug top PSU)
• Size: 6.7cm (height) x 12.5cm (width) x 2.8cm (depth)
• Input connection: 3.5mm jack socket
• Output connection: 3.5mm jack socket

Package Includes

• Graham Slee The Voyager Portable Headphone Amplifier
• AC Power Adapter
  

Please note: The Graham Slee Voyager does NOT include a a 3.5mm jack cable, which is required to connect the amplifier to an audio source. This must be purchased separately.