iBasso P3+ Portable Headphone Amplifier in Silver & Black

iBasso P3+ 'Heron' Description

iBasso P3+ ‘Heron' Portable Headphone Amplifier in Silver & Black. This resourceful headphone amplifier from iBasso could easily incorporate the word ‘flexible' in its name. Not only does the P3+ ‘Heron' produce a potent, clean and balanced amplified signal to your headphones, it also incorporates the possibility to fine-tune the audio response by ‘rolling' OPAMPs. And if that is not enough, the case of the P3+ is interchangeable with two supplied casings, silver and black, to suit your current sentiment.

Designed with perceptive music enthusiasts in mind, the P3+ delivers the best possible portable amplification. With a high output power of 250mW+250mW even the most demanding headphones are supplied with plenty of reserve current. High power and clear linear response are assured thanks to two large NCC 3300uF capacitors, which have been specifically selected for the P3+ ‘Heron'. With enough muscle to drive high impedance headphones such as the Sennheiser HD650, the P3+ will satisfy your hunger for powerful audio reproduction. The iBasso P3+ also incorporates a high and low gain setting feature to match the impedance of any chosen headphone set.

What makes the iBasso P3+ an exceptionally resourceful amplifier is the facility to ‘roll' OPAMP circuits. To put it simple: a broad selection of interchangeable OPAMP chips included in the package allows you to fine-tune the sound to suit any musical flavour. The OPAMP chips are highly praised and include Analog Devices AD797, National Semiconductor LM6172, Linear Technology LTC6241HV and Texas Instruments NE5534. These components have received consistent outstanding reviews on the Head-fi.org audiophile forum. These components have received consistent outstanding reviews on the Head-fi.org audiophile forum.

Powered by 6 AAA batteries, the iBasso ‘Heron' provides a running time of approximately 100 hours when on the go. While at home or in the office, the P3+ can also be powered with the supplied mains adaptor. Portability is made easy due to the miniature size of only 5.5cm x 2.1cm x 9.2cm. And with a weight of only 122g you will not even notice the ‘Heron' in your pocket.

Join the movement and indulge in the perfect high-end audio travel companion: P3+ ‘Heron' from iBasso.

iBasso P3+ 'Heron' with black enclosure fitted

iBasso P3+ Heron Features

• High quality Four Channel + Buffer architecture
• High and Low gain setting for matching headphone impedance
• Two large 3300uf power supply capacitors for linear, ultra clean signal
• Total of 8 gold-plated DIP sockets for OPAMP and buffer rolling
• Powered by either 6 AAA batteries or external power adapter

Technical Specification

• PSU includes 2x 3300uF Nippon Chemi-Con capacitors
• 2-Setting Gain Jumper for impedance matching (High/Low settings).
• Power supply: 6x AAA batteries or supplied external PSU
• Estimated Battery Life: Up to 100 hours (depends on amps and buffers)
• Frequency Response: 10Hz - 100Khz +/- 0.4d
• Signal to Noise Ration: -109dB
• Crosstalk: 101dB
• Total Harmonic Distortion: 0.0015% @ 1kHz/0dB
• Output Power: Upto 250mW+250Mw into 32 Ohms
• Gain: +3dB/+10.5dB
• Size: 55 x 21 x 92mm
• Weight: 122g (without batteries)

Package Includes

• iBasso P3+ 'Heron' headphone amplifier in Silver.
• Black slide on enclosure.
  
• Opamp rolling kit. (includes AD797 x2, LM6172 x2, LTC6241HV x1, NE5534 x2, Dummy adapter x2, Transistor BUF x2, empty adapter x2)
• 3.5mm to 3.5mm audio cable
• Tool for accessing battery compartment and swapping OPAMPs
• Leatherette pouch
• Mains power adapter