BLACK FRIDAY WEEK IS HERE! We added even more hot products to our deals. Check out our time limited special offers with discounts up to 80%



    Free UK delivery over £50

    Expert Knowledge & Advice

    UK Customer Support

    30 day money back guarantee

    iFi Audio xCAN Portable Wireless Headphone Amplifier - Refurbished

    • Portable balanced high-resolution headphone amplifier with Bluetooth
    • AAC and aptX enabled Bluetooth for CD level wireless sound quality
    • Drives any headphone with impedance of 32 ohm to 600 ohm
    • S-Balanced technology delivers maximum balanced performance

    In Stock - Only 1 item left!

    • iFi Audio xCAN

      Refurbished unit in excellent condition repackaged with original accessories or accessories from compatible models and brands.

      Making a stir in the portable audio world, iFi introduces the xCAN high-resolution headphone amplifier with balanced connection, advanced Bluetooth connectivity and enough power to drive demanding headphones. Packed full of advanced and exclusive technologies the xCAN is made for audiophile listeners on the move that want to get the most out of their headphones.

      As the main force behind xCAN's tremendous power resides a dual-mono headphone amplifier that directs up to 1000mW of power into each channel. This gives the xCAN the ability to drive anything, from low impedance balanced IEMs to power-hungry planar magnetic headphones, to their capabilities. Also, the xCAN has been equipped with 2.5mm balanced input suitable for connecting to high-end digital audio players.

      Enjoy the benefits of a wired connection or the freedom of near lossless Bluetooth as iFi xCAN works both wireless and wired. With S-Balanced technology from iFi Audio also means it’s compatible with all single and balanced headphones and IEMs. To round of this excellent piece of audio kit the xCAN shows off smooth contours and a futuristic aluminiferous design.

      Audio ahead of its time.

      iFi Audio xCAN


      Balanced Power
      The xCAN boasts a dual-mono headphone amplifier with 1000mW of power per channel which can unleash the full potential of both 32ohm through to 600ohm headphones. The xCAN offers balanced in/out to take full advantage of the growing availability of balanced sources and headphones.

      Balanced Performance
      iFi exclusive S-Balanced technology delivers the maximum performance from single-ended and balanced headphones alike. The S-Balanced 3.5mm headphone output delivers the benefits of the balanced connection to single-ended headphones. Reap the advantages of balanced wiring, enjoy lower distortion and reduced crosstalk.

      Complete Bluetooth
      Able to deliver the best Bluetooth via AAC, aptX and aptX LL with added iFi creativity. Any conversion of digital to analogue is handled exclusively by the ESS Sabre DAC and bypasses the Bluetooth system entirely. As a result, the Bluetooth chip can focus its full capacity on delivering clean and complete wireless audio with very little sound quality loss.

      3D Bass Boost
      Exclusive to iFi Audio, the 3D+ system creates a more engaging sound and puts the performer on stage in your home. XBass Ⅱ analogue bass correction system corrects headphone bass response to deliver a more natural sound to the upper bass frequency band.

      The Cyberdrive headphone amplifier stage is one of the pivotal new circuit designs in the x-series. This new design places all parameters of the fully analogue system under digital control for a ‘best of both worlds’ scenario. The Cyberdrive design incorporates the iFi exclusive OV4627 ultra-low noise FET input Op-Amp and W990VST digitally controlled stepped attenuator.



      • Wireless Input: ESS Sabre 44.1/48k 16-Bit (AAC, aptX, aptX LL and SBC)
      • Wired Input: 2.5mm (TRRS), 3.5mm TRS/TRRS S-Balanced (TRRS S-Balanced only found in iFi components such as nDSD BL. Do NOT feed using normal TRRS Balanced output sources.)
      • USB Audio Input: No USB audio input
      • Max Output S-Balanced: >3.8V / 45mW (@ 300Ω), >3.5V / 380 mW (@ 32Ω), >3.1V / 600mW (@ 16Ω
      • Max Output Balanced: >7.6V / 90mW (@ 600Ω), >7.2V / 800 mW (@ 64Ω), >5.7V / 1,000mW (@ 32Ω)
      • THD & N S-Balanced: <0.005% (@ 100mW/1.26V 16Ω)
      • THD & N Balanced: <0.006% (@ 360mW/2.4V 16Ω)
      • SNR S-Balanced: >121dBA (@ 3.8V)
      • SNR Balanced: >120dBA (@ 7.6V)
      • Recommended Headphone Impedance: 16Ω - 600Ω
      • Gain: -95dB to +18dB adjustable in 114 1dB steps (using volume control)
      • Frequency Response: <2Hz – >200kHz (-3dB)
      • Playback Time: >8 hours (charging via USB port)
      • Dimensions: 95 x 67 x 19 mm (LxWxH)
      • Weight: 127g



      • Portable balanced high-resolution headphone amplifier with Bluetooth
      • Drives any headphone with impedance of 32 ohm to 600 ohm
      • Balanced 3.5mm and 2.5mm in/out takes advantage of balanced sources and headphones
      • S-Balanced technology delivers maximum performance from single-ended and balanced headphones
      • High-quality Bluetooth streaming via AAC, aptX and aptX LL
      • Analogue bass correction system create engaging sound
      • Global Master Timing from AMR solves digital jitter problem
      • Pure analogue volume control retaining full-resolution at all volume levels
      • Internal battery does not draw battery power from portable devices



      • iFi Audio xCAN Headphone Amplifier


      1. BrandiFi Audio
      2. ColourSilver
      3. Manufacturer Warranty1 Year
      4. GTIN5081313082063
      5. Part NumberiFi xCAN
      6. Product TypeHeadphone Amplifier