THE EXCLUSIVE DEAL OF THE WEEK IS HERE! SAVE 50% ON THE CLEER NEXT PREMIUM HEADPHONES.

TAKE ME THERE

Search

    Free UK delivery over £50

    Expert Knowledge & Advice

    UK Customer Support

    30 day money back guarantee

    JDS Labs Atom Amp+ Headphone Amplifier - UK Plug

    • Efficiently drives sensitive IEMs and easily powers demanding headphones
    • Boosted performance using same analogue integrated circuit as Atom DAC+ NEW
    • Custom matched potentiometer with superior low volume imaging NEW
    • Upgraded input stage amplifier chips and tweaks to supporting resistors NEW
    • Achieves 119dB signal-to-noise-ratio of around 6dB NEW
    • Equipped with 6.35mm jack, preamp RCA output and 3.5mm/RCA inputs
    • RCA preamp output controls volume on external sources
    • Analogue amplifier section with 4-layer, star grounded layout
    • JDS Labs Atom Amp+

      Even more matter and even more substance, JDS Labs Atom+ has been conceived as the next-generation replacement to Objective2, and builds on more than a decade of amplifier design evolution at JDS Labs. Atom Amp+ tops the award winning Atom Amp with hand matched potentiometers and even higher performance, and comes fully loaded with a smooth 6.35mm headphone jack, gold-plated preamp RCA outputs, and both 3.5mm and RCA inputs. Ample power. No noise. Front-mounted controls. Atom Amp+, the JDS Labs standard for performance and value in a headphone amp.

      Atom Amp vs. Atom Amp+ - What's New?

      • Boosted performance using the same analogue integrated circuit employed in the matching Atom DAC+
      • Custom matched potentiometers with superior low volume imaging of up to 20dB better than the original Alps potentiometers
      • Upgraded input stage amplifier chips from NJM2068 to NJM5532 and small tweaks to supporting resistors
      • Achieves 119dB signal-to-noise-ratio of approximately 6dB improvement

       

      More than 1W of power into each channel allow the Atom Amp+ to be more than capable of driving even the most power-hungry headphones with ease. Dual gain settings extend the ability of the Atom+ for use with highly sensitive IEMs as well as hard to drive headphones.

      With no need for a separate amp and preamp the Atom+ acts as full volume control for external devices via its RCA output. Atom Amp+ is the most advanced amplifier from JDS Labs achieving the highest performance levels for all analogue audio requirements.

      Your new favourite amp and preamp.

      JDS Labs Atom Amp+

      Ultra High Power
      While most headphone listening demands only milliwatts, Atom Amp+ uses the same output buffers as our flagship Element Line, pushing 1W of clean audio per channel. We avoid the marketing race to overkill power in order to keep Atom's power supply reasonably sized.

      Preamp Outputs
      Unplug your headphones and Atom Amp+'s knob adjusts volume of its RCA preamp outputs, so that you can control volume of your powered speakers.

      Dual Inputs
      Atom Amp+ consolidates the need for a separate amp and preamp. Connect up to two sources and select between 3.5mm and RCA input with the push of a button.

      Smart Logic
      Designed for desktop listening, Atom Amp+'s relay muting eliminates pops and thumps during startup.

      Dual Gain
      Low gain of 1.0x with hand matched potentiometers are well suited to driving efficient IEMs. High gain easily powers demanding full size sets when paired with the matching 2VRMS Atom DAC+.

      Top Performance
      Atom Amp+ is JDS Labs' most advanced analogue amplifier to date, achieving top performance from its 4-layer, star grounded layout.

      Technical Specifications

      Performance
      • Frequency Response: 20Hz - 20kHz
      • SINAD (2VRMS, 1kHz): 119dB
      • SINAD (50mV, 1kHz): 90dB
      • SNR (20-20kHz): > 122dB
      • IMD SMPTE: -95dB
      • Noise (20-20kHz): 1.99μV
      • Crosstalk (10kHz): 150Ω - 92dB
      • Input Impedance: 10kΩ
      • Output Impedance: 0.1Ω
      • Channel Balance: < 0.6dB
      • Max Continuous Power (600Ω): 136mW (9.05VRMS)
      • Max Continuous Power (150Ω): 545mW (9.04VRMS)
      • Max Continuous Power (32Ω): 1W (5.66 VRMS)
      General Specifications
      • Headphone Output: 6.35mm (1/4")
      • Analogue Inputs: RCA and 3.5mm
      • Preamp-Output: RCA
      • Dual Gain: 1.0x and 4.5x
      • Volume Potentiometer Taper: 15A, Hand Matched Gangs
      • Case Dimensions: 5.0 x 5.5 x 1.4 in
      • Weight: 9.3oz

      Features

      • Efficiently drives sensitive IEMs and easily powers demanding headphones
      • Boosted performance using the same analogue integrated circuit employed in the matching Atom DAC+ NEW
      • Custom matched potentiometer with superior low volume imaging up to 20dB better than the original Alps potentiometer NEW
      • Upgraded input stage amplifier chips from NJM2068 to NJM5532 and small tweaks to supporting resistors NEW
      • Achieves 119dB signal-to-noise-ratio of around 6dB better NEW
      • Equipped with 6.35mm jack, preamp RCA output and 3.5mm/RCA inputs
      • RCA preamp output controls volume on external sources
      • Ultra high power with up to 1 Watt per channel
      • Relay muting eliminates pops and thumps during start-up
      • Analogue amplifier section with 4-layer, star grounded layout
      1. Manufacturer Warranty2 Years
      2. Part NumberAtom Amp+ - UK plug
      3. Included Accessories16VAC Power Adapter (UK Plug)
    x